How Thermal Receipt Printers Turn Photos Into Dots
A thermal printer can only print black or nothing. Here is how dithering fakes shades of grey with tiny dots, and how to get the best result.
A printer with only one color
A thermal receipt printer has no ink. Inside it sits a row of tiny heating elements, usually 203 to the inch, pressed against paper that is coated with a heat-sensitive chemical. When an element warms up, the coating under it turns dark. When it stays cool, the paper stays pale. Every dot is either black or blank, so there are no grey levels at all. Engineers call this one-bit output.
Photographs, on the other hand, are full of smooth tones. A face has thousands of subtle steps between shadow and highlight. To print a photo on a machine that only understands on and off, the picture has to be converted into a pattern of dots where the density of dark dots suggests how bright an area is. Your eyes blend the dots together from a normal reading distance, so the pattern looks like a grey tone.
Why a simple threshold looks bad
The easiest conversion is a threshold: every pixel brighter than a chosen level becomes white and every darker pixel becomes black. This keeps strong outlines but destroys everything in between. A smiling face turns into a few black blobs, and a soft sky turns into a flat white page. Thresholding is useful for logos and signatures, but it is a poor choice for photographs.
Dithering was invented to solve exactly this problem. Instead of comparing each pixel with one fixed level, a dithering method uses a changing level, or it spreads the rounding error to nearby pixels. Either way, mid-grey areas end up with a mix of black and white dots instead of a single flat color.
Ordered dithering and error diffusion
There are two big families of dithering. Ordered dithering compares each pixel with a small repeating grid of thresholds, often called a Bayer matrix. It is very fast and gives a neat, regular texture that many people find nostalgic. Because the pattern repeats, large flat areas can show a visible grid, and that grid is part of the charm of old computer graphics.
Error-diffusion methods, such as Floyd-Steinberg, work pixel by pixel. After turning a pixel black or white, the method measures how wrong it was and pushes that error onto the neighbours that have not been processed yet. The result looks more organic and keeps more fine detail, but it is slower and can create worm-like patterns. Print My Pic uses an ordered pattern for its Thermal look because it runs smoothly in a browser while you change settings, and it adds other looks such as halftone and posterised ink for variety.
How to prepare a photo for a thermal print
Choose pictures with a clear subject and strong contrast. Fine, low-contrast detail turns into noise once it is reduced to dots. A portrait taken in soft window light usually prints better than a busy street scene shot at dusk.
Brighten dark photos a little before printing. Thermal dots look heavier on paper than they do on a glowing screen, so an image that looks balanced on your phone can print too dark. Crop tight on faces or objects too. A narrow 58 mm receipt has only about 384 dots across, and small background details disappear quickly.
Quick checklist
Pick a high-contrast photo, crop close to the subject, raise the brightness slightly, and compare two or three looks before you print. If a picture looks muddy, try the Photobooth look, which adds hard contrast and grain, or the Red Ink look, which uses three tones instead of two. The best way to learn is to try the same photo in several looks and keep the one that feels right.
Ready to try it? Open the free tools.